Follow Us

Band Saw Buying Guide and FAQ’s

Band Saw Buying Guide and FAQ’s

Who should buy a band saw?

If you’re in the market to purchase the best band saw, you certainly may not know which model or type is the appropriate one for you. You do not only have to select the type of strength the machine uses, but you also must look at the blade length, ease-of-use, and the amount of maintenance required.

There’s a whole lot of options on the market now, And, if you’re brand new, you’re in luck, because we have been able to gathered reviews of some of the best band saws on the market at the moment, guiding you through what’s good and what’s not-so-good about each machine model.

We’ve also included a buyer’s guide so that you can gain an in-depth knowledge of what band saws are all about. If you find the right model for you, then you need to know what kinds of things you should be giving attention to and details to when purchasing them.

Corded Vs Codeless

While working to get an intended job completed, using either the cordless or corded band saw can get the intended job done. Nonetheless, the basic contrast between both is that a cordless band saw usually has a smaller blade to that of a corded saw. Which means it can’t pull enough power while cutting through a thick board. So  Also, when there is a lot of work to be done, and there is an uninterrupted power supply the corded band saw is more efficient than having to change and charge batteries, while It is alright to use a cordless band saw in a working environment that is unable to provide a nearby electric outlet. However, in situations when a power outlet is provided, it is advisable to use a corded band saw to get the intended work done. One thing for sure is that as science keeps evolving, cordless tools will surely get more powerful and last for days after a single recharge

Important Features to Consider

Ease of Use

You may end up spending a bit more money, but you’ll be happier and fulfilled in the long run with a machine that allows for quick and easy blade changes.

The Ease of use in-band saws can be achieved from many places, however, the most important aspect to consider is how easy it is to change out the blade. If you’re planning on cutting a variety of materials regularly, you will need to be changing out the blade often. If you’re planning on using the machine frequently, you’re going to wear off the blades, and need to replace them.

Some design is modelled in a way that makes exchanging the blade extremely easy, while others just don’t. The models that are more difficult to change blade can be tiring, frustrating and end up consuming a lot of time that could be used on other jobs.

Type of Project

While choosing a bandsaw, you should be mindful of what kind of project you are about to carry out. Different types of projects are done best with different kinds of blades, so also there are other features of the different machines that will make them better suited to different kinds of projects.

If you’re intending to carry out projects that require harder wood varieties, then you need a machine with an overabundance of power. Choosing a strong machine will be the best choice. The speed of the blade will be very fast, and it will ensure a quality cut and speed up the completion of the intended job.

The point here is to determine what your needs are and then find the machine that can match those needs.

Shopping for value

When it comes to value, something to be mindful of while you’re purchasing a band saw machine is the fact that just because a is more expensive, doesn’t signify that it’s better or stronger. Same also, a product that is cheaper doesn’t always mean worse or low quality, even if things generally go that way, therefore, rather than focusing on expensive or cheap, it is better to rather focus on value and getting the best machine that will suit your need.

Durability

When the body of the machine is made out of the inferior materials, there is a high probability that the machine is not going to last for long. Band saws usually use a single blade under very high tension to make cuts.

This implies that the whole body of the machine is under stress while it is been used and while the machine is at rest.

It’s also going to put more load on the blade, which can lead to flawed cuts, and it reduces the lifespan of the blade, which over time, will lead to a tremendous increase in the cost of operation.

Frequently Asked Questions

What is a portable band saw used for?

The best portable bandsaw can be used to cut metal signposts, railroad ties, or anything outside the workshop. It is used also to cut bigger materials that cannot be cut by a regular band saw machine. Although, it can be used to cut pipes, and other similar objects since the blades of a portable band saw offer minimal vibration and steady pressure, bringing about a cleaner cut. The portability of a band saw gives room to achieve an endless outcome.

What’s the difference between Conventional and Portable Band Saw?

Just as the name implies the portable bandsaw, provides the opportunity to easily and quickly carry it from one job site to another. Which makes it a good pick for bigger jobs where the material cannot be worked on with a traditional band saw, or when you’re required to operate with the band saw away from the garage or shop. A regular floor-standing band saw is usually used to cut and carve irregular shapes, tear lumber into slimmer parts, and to resaw. From the foregoing, as a result of the size, a conventional band saw has a much larger and higher cut capacity.

Why is a Portaband table needed and is it important to get one?

A porta band table is an important piece of equipment for those working within a small space as for those looking to improve the ability of their portable band saws. The portal and table are a permanent stand for different brands and models of portable band saws that helps strengthen a much more accurate cut and a safer and easy way to achieve this.

Conclusion

This band saw reviews and buyer’s guide are aimed towards helping and making it clear for buyers what they should be looking for and what to expect when they are shopping for a band saw. Here is a summary of our top 3 choices.

The SKIL 3386-01 2.5-Amp 9-Inch Band Saw was our top pick, due to the saw modification to work effectively and efficiently with wood materials, and If you need straight, accurate cuts of different shapes and sizes.

The WEN 3962 Two-Speed Band Saw falls under the runner up category, this machine has a flexible work light installed in it to illuminate the workpiece, a thick fence for creating straight cuts, a meter gauge to cut along exact, angles, and with a 25-inch stand to elevate the band saw.

The Wen 9 Inch Benchtop Band Saw Comes in at a third place and falls under the budget-friendly category, this machine Ball-Bearings provides The Blade easy Operation and A Long-Lasting Life span and Years Of constant and Dependable Service.

It’s not always easy to purchase goods online, therefore we came up with a list of the review that you need to consider and look out for when choosing a model to meet your needs.